Bending reinforcement tape
It is used for flexible and durable sealing of joints and corner joints in walls and floors in bathrooms and shower cabins, as well as for connecting vertical and horizontal surfaces. The flexural reinforcement tape is made of knitted synthetic material with a flexible elastomer layer.
Application:
The Bend Reinforcement Tape is placed in the first, fresh insulating coating layer. In order to ensure proper waterproofing of the insulating system, it is advisable to check the tape’s position before the insulating coating has set and, if necessary, make any adjustments. After that, it is necessary to apply the additional coating layer to the entire surface, including the Bend Reinforcement Tape.
The Bend Reinforcement Tape is placed in the first, fresh insulating coating layer. In order to ensure proper waterproofing of the insulating system, it is advisable to check the tape’s position before the insulating coating has set and, if necessary, make any adjustments. After that, it is necessary to apply the additional coating layer to the entire surface, including the Bend Reinforcement Tape.
Color:
white, gray
white, gray
Heat resistance:
-35 °C to +80 °C
-35 °C to +80 °C
Tensile strength:
7 MPa
7 MPa
Maximum water pressure:
4 Bar
4 Bar
Elongation at break:
70-80 %
70-80 %
Total thickness:
min. 0.5 mm
min. 0.5 mm
Length:
10 meters; 50 meters
10 meters; 50 meters
Storage:
In dry conditions, between +5 °C and +25 °C. Protect the product from UV radiation.
In dry conditions, between +5 °C and +25 °C. Protect the product from UV radiation.